Template Individual Edit ‘CC’ Menu
Page Number Page Name DATA Encoder selects…
1 Control Type Control Type (See List above)
2 Control Number 0–127
3 Display Type 0-127 or –64 +64
4 Pot Control ‘Jump’ or ‘Pickup’ Mode
5 Low Value Low Value of control
6 High Value High Value of control
7 Button type Action of button
8 Button Step size Size of increment
9 MIDI Channel MIDI Channel for this control
10 MIDI Ports Port routing for this control
11 Control Naming Name of control
Here is a detailed breakdown of each page of the individual Template Edit Menu once ‘CC’ has been
selected on Page 1:
Edit Menu Page 2 –Control Number
This page allows you to select the Continuous Controller Number. Rotating the DATA encoder scrolls
through numbers 0 to 127.
Edit Menu Page 3 –Display T
ype
This page chooses the specific values you wish the control to send, whether they are between 0 and 127
or -64 and +63. Rotating the DA
TA encoder selects either XXX = 0 – 127 or XXX = -64 to +63 as the
minimum and maximum values for the control. For example, if wanting to assign the volume of a track to
a knob then 0-127 would be preferable, whereas the pan would suit -64 to +63.
Controller Num
119
Display Type:
XXX
To Next Page
Loading...
