PREVIEW MODE
W
hen the Xio is in Preview Mode you can operate any pot, any button, the XY touchpad or a sustain pedal
t
o see its current value on the Xio display without actually changing the control value. This applies to when the
X
io is in synth mode or MIDI controller mode and also to when you are editing the audio interface settings.
To put the Xio into Preview Mode press and hold both the effects up/down selector buttons for one second.
All of the effects LEDs will light to indicate that Preview Mode is active. If the Xio is in synth mode the LED
for the currently effect will remain unlit but all others will light. To exit Preview Mode press hold both the
effects up/down selector buttons once more.
To Next Page
Loading...
