Edit Menu Page 9 –Control MIDI channel setting
XX is set to any of the 16 MIDI channels using the DATA encoder. This means that all CC MIDI data assigned
to the control will be transmitted on that MIDI channel.
Edit Menu Page 10 –Control MIDI Port routing
XXX is set to OFF, USB (USB Port), MIDI (MIDI Out port) or USB+MIDI using the DATA encoder. This means
that all CC MIDI data assigned to the control will be sent to the selected port(s) only.
Edit Menu Page 11 –Control Name
The DATA encoder is used to change the currently selected character (with the cursor positioned below it)
between A-Z, a-z, 0-9 etc. and the cursor is moved left and right using the OCT
AVE UP/DOWN buttons.
Repeated presses of the Menus/Audio button cycles between capitals, lower case, numbers or punctuation.
At any time whilst in EDIT mode, rotating/pressing a knob/button will cause it to become the control for
editing regardless of which Menu Page is currently selected in the Template Individual Edit Menu.
Midi Channel:
XX
Midi Ports:
XXX
Control name:
Amp Env Attack
To Next Page
Loading...
