Simply pressing and holding the Touchpad in one of the quadrants as shown in the diagram will first display
all MIDI data assigned to that control within the touchpad, as follows:
If the X1 quadrant had been pressed, this would signify that Filter Frequency had been assigned to the first
parameter on the X-axis (horizontal) on Continuous Controller number 74, at a current value of 55. The 1
and U signify that X1 is transmitting on MIDI channel 1 and over USB.
Then the display will move to the first page of the Template Individual Edit Menu as it would do if any
assignable control was touched in this mode, showing the following:
Now, whatever control within the Touchpad was pressed (X1, X2, Y1 or Y2) can be edited the same way
as any assignable control on the Xio. See the Template Individual Edit mode menus for more information on
how to do this.
Filter Freq
55 CC74 1 U
Control Type:
55 CC
To Next Page
Loading...
