Global Menu Page 4 – MIDI data routing
This page allows the MIDI data received at the USB port to be routed directly to the MIDI Out port,
for controlling external hardware with the Xio. Set this to On or Off, as required.
Global Menu Page 5 – Global pot action
This page allows a Global knob action (Jump or Pickup) to be set, which will override any individual control
settings (set in EDIT mode). Set this to PICKUP or JUMP for the override to take effect. Set to OFF for the
individual control settings to take effect.
Global Menu Page 6 –Set Display timeout
This page sets the amount of time that the LCD display shows temporar
y screens such as the MIDI data
when an assignable control is moved. Rotating the DATA encoder sets XXX at a value between 0 and
1260 ms, and then PERMANENT.
Global Menu Page 7 – Sustain Pedal Settings
This page allows one of several Sustain Pedal actions to be activated:
AUTO automatic pedal action (this is the default setting)
NormOPEN close when pressed
NormCLSD open when pressed
USB to MIDI Out:
XXX
Pot/Slid Ovride:
XXX
Display Timeout:
XXX
Sustain Pedal
XXX
To Next Page
Loading...
