GLOBAL Menu
G
lobal Edit menu page 1 – Memory Protect
This page of the menu allows protection of the Xio onboard memory to be activated. Using the
Data encoder to select XXX as ‘On’ will mean that none of the 12 onboard Templates can be overwritten.
Choosing ‘Off’ will mean that the WRITE button procedure for saving onboard Templates or Synth patches
can be carried out.
Global Menu Page 2 – Phantom Power
Use the data encoder to select OFF, 12, 24 or 48V to supply the relevant phantom power to a microphone
connected to Input 1 (XLR Input).
Global Menu Page 3 –Dump Template(s)/Synth patches
This page allows an individual onboard Template, set of all 16 Templates, the Global settings, an individual
Synth patch or an entir
e Sound Bank to be dumped (sent) to a destination, most likely the Xio Template
Editor. Rotating the Data encoder selects between the following options:
Cur
rent Template, All Templates, Send Globals, Current Sound, Sound Bank 1 or Sound Bank 2 (The last
three options will only appear when in Synth mode.)
Pressing the WRITE button once will then send the currently selected Template to the receiving device
as a sysex message. To indicate completion, the screen will flash:
Memory Protect: XXX
Phantom Power:
XXX
Dump:
Current Template
DONE
To Next Page
Loading...
