XGATE Level – sets the level of the X-Gator
XGATE Edge – sets the edge of the X-Gator. Increase to soften and make the effect smoother
XGATE Decay – sets the decay time of each step. Below 64 shortens and above 64 lengthens
XGATE Delay – increases/decreases the amount of delay on the X-Gator
XGATE Keysync – synchronises the X-Gator start with each key press. Set to OFF to make the X-Gator run freely
The X-Gator tempo can be set in the Sync Menu (see the Sync Menu section for details).
To Next Page
Loading...
