Saving/Naming a Template
Once some edits have been made to an existing Template or an entirely new one has been constructed,
the Template must be saved to the onboard memory in order to recall that Template at a later date. The
other alternative is to send the Template to the Template Editor application that can be downloaded from
www.novationmusic.com and then save it to the desktop. If saving onboard though, simply pressing the
WRITE button will move through the saving procedure. After pressing once, the screen shows:
V-Station is the name of the currently selected Template and XX is the number (from 1-16) of that Template.
Simply rotate the DATA encoder to select a different Template number if required, then press WRITE again
to save the current settings to that Template number.
If after the first press of the WRITE button, the screen shows:
(The message will appear temporarily and then the Xio will return to PLAY mode.)
Then the Xio GLOBAL setting has activated Memory Protect, which will mean onboard Templates cannot be
overwritten. (See the GLOBAL memory section for details.)
Providing Memory Protect (in the GLOBAL menu) is off then, once the WRITE button has been pressed
for a second time, the LCD display will show:
The name of the Template can now be modified if required by using the DATA encoder to change the
character fr
om A-Z, a-z, 0-9 etc. and the OCTAVE UP/DOWN arrows to move the cursor. Repeated
presses of the Menus/Audio button cycles between capitals, lower case, numbers or punctuation.
V-Station
To Template XX
MEMORY
PROTECTED
Template ReName?
Fred Station
To Next Page
Loading...
