NSS eForce - Specifications; Machine Dimensions;Capacities;Performance

22
SPECIFICATIONS
Machine Dimensions/Capacities/Performance
MODEL
eForce Burnisher
Length 62 in (157 cm)
Width 30 in (76 cm)
Height 48.5 in (123 cm)
Weight 368 lb (167 kg)
Weight with batteries 1,100 lb (499 kg)
GVWR 1300 lb (590 kg)
Cleaning path width 27 in (686 mm)
Productivity rate (max.)
35,640 ft
2
/hr (3,311 m
2
/hr)
Burnishing speeds (2 standard settings)
Low: 150 fpm (45.7 mpm)
Med: 175 fpm (53.3 mpm)
Transport speed (max.)
Fwd: 435 fpm (8 Kpmh )
Rev: 240 fpm (4.4 Kpmh)
Aisle turn (min.) 65 in (165.1 cm)
Burnishing Grade level (max.) Burnishing: 9%
Transport Grade level (max.) Transport: 13%,
Propel motors (2) 36 V, 7 A, .25 hp (.37 kW)
Pad motor 36 V, 100 A, 3.6 hp (2.7 kW)
Pad Pressure
Low: 60 Ib (20.4 Kg)
Med: 75 Ib (29.5 Kg)
High: 90 Ib (38.5 Kg)
Pad speed
Low: 1600 RPM
Med:1650 RPM
High: 1700 RPM
HEPA filtration 95% @0.3 micron / CFM 22.5
Dust bag capacity 1.9 gal (7.2 l)
Machine Voltage 36 VDC
Battery capacity Six 6V, 430 Ah Wet / lead acid (std.),
Six 6V, 390 Ah AGM (opt.)
Total power consumption 120A / 4.3 kw nominal
Run time (max.) 3.0 hours
Battery charger 120 VAC, 60 Hz, Output 36VDC, 36 A
220/240 VAC, 50/60 Hz
Output 36 VDC, 40 A
Protection grade IPX3
Sound pressure level 68 dB(A)
Ambient operating temperature
Min: +14°F (-10°C)
Max: +122°F (+50°C)
Repairs performed by an unauthorized company will void the machine warranty.
If
y
ou re
q
uire assistance findin
g
an authorized service center
,
contact NSS Enter
p
rises.