MIDI Operation
The unit should be visible in the
CONTROLLERS tab of Config as 3 devices
(Numark NV for the main unit and 2 more for
the Left and Right LCD Displays) and the
“factory default” available/selected from the
Mappings drop-down list for all 3 of them.
The factory default Mapping offers the
functions described in this Manual, however
those can be adjusted to your needs via VDJ
Script actions.
Find more details at
http://www.virtualdj.com/wiki/VDJscript.html
AUDIO Setup
The unit has a pre-defined Audio setup and
a special button in the AUDIO tab of Config
to provide that.
See also Inputs & Recording.
Please read the manual of the unit for further connections/capabilities.
http://www.numark.com/images/product_downloads/NV_-_User_Guide_-_v1.1.pdf
For further software settings please refer to the User Guides of VirtualDJ 8.
http://www.virtualdj.com/wiki/PDFManuals.html
To Next Page
Loading...
