Need help?Do you have a question about the Nuomm NEWSCASTER VT2 and is the answer not in the manual?
General| Video Format | MPEG-1/2, MPEG-4, H.264, H.265, MJPEG |
|---|---|
| Video Resolution | Up to 1920x1080@60fps |
| Audio Input | 1 x 3.5mm Line in, 1 x Mic in |
| Streaming Protocol | RTMP, RTSP, UDP, HTTP, HLS |
| Power | 12V DC |
| Operating Temperature | -10°C to 50°C |
| Data Interface | Ethernet |
Details the NewsCaster VT2 transmitter system, its components, and frequency range.
Highlights quick-key presets, dynamic color bars, HD capability, and options like Pan & Tilt control.
Covers digital/analog input formats, LCD display, presets, encoder, and modulator features.
Details frequency bands, tuning step size, 70 MHz input, and frequency stability.
Specifies power output levels and describes the function and operation of the standby mode.
Details modulation modes like COFDM, Analog FM, VSB, and their associated video & digital input performance.
Covers unpacking, inspection for damage, and performing initial system checks.
Information on cables and connectors used for system interconnection, including TNC and Triax types.
Provides instructions for the electrical installation of the Control Unit, including power and video/audio connections.
Guidance on mounting the RF Head and identifying its various connectors for proper setup.
Explains how to operate the unit using the front panel controls, LCD display, and menu navigation.
Details the function of controls, indicators, and the upper level menu structure for parameter adjustments.
Provides instructions for configuring settings related to the Nextel BAS relocation for specific frequency band plans.
Lists common alarm messages, their probable causes, and troubleshooting steps for resolving issues.
To Next Page