NewsCaster VT2 Specifications & Frequency Plans
M17-0002-01A Rev 0.0 19 User Manual
3. SPECIFICATIONS AND FREQUENCY PLANS (USA)
RF PERFORMANCE
Frequency Bands (Front panel selectable)
Band 1: .......................................................1.99 GHz – 2.50 GHz
Band 1 (optional): .......................................2.30 GHz – 2.70 GHz
Band 2: .......................................................6.43 GHz – 7.12 GHz
Band 3: ........................................................12.706 GHz – 13.250 GHz
(other plans available per user requirements)
Tuning step size: .........................................250 kHz (US), 100 kHz (International)
70 MHz input: .............................................–10 dBm to 0 dBm (75 Ohms)
Frequency stability: .....................................± 5ppm (.0005%)
Power Output:
2 GHz band:
Standard: ..........................................12 Watt Analog; 4 Watt Digital
Optional: ..........................................10 Watt Digital**
6/7 GHz band:
Standard: ..........................................5 Watt Analog; 2 Watt Digital
Optional: ..........................................10 Watt Analog, 4 Watt Digital
Optional: ..........................................10 Watt Digital**
Dual Band 2 + 7 GHz:
Standard: ..........................................2 GHz: 12 Watt Analog, 4 Watt Digital
Standard: ..........................................7 GHz: 5 Watt Analog, 2.5 Watt Digital
Optional: ..........................................10 Watt Analog; 2.5 Watt Digital;
Optional: ..........................................10 Watt Digital**
13 GHz Band
Standard: ..........................................1 Watt Analog, 0.25 Watt Digital
Optional: ..........................................3 Watt Analog, 1.75 Watt Digital
**Analog adjustable to FCC maximum EIRP (max amp power 25 Watt);
Standby mode:
Standby: ...........................................No RF output
Normal:............................................Instant on frequency transmission
To Next Page
Loading...