36
EMC Tables
Reco mmended separation distance be twee n portab le and mobile RF communicatio ns
equipment and the NuStep® T5 Recumbent C ross Trainer
The NuStep®
Recumbent Cross Trainer is intended for use in an electromagnetic
environment in which radiated RF disturbances are controlled. The customer or the
user of the NuStep® T5 Recumbent Cross Trainer can help prevent electromagnetic
interference by maintaining a minimum distance between portable and mobile RF
communications equipment (transmitters) and the NuStep® as recommended below,
according to the maximum output power of the communications equipment.
Rated maximum
output power of
transmitter
W
Separation distance according to frequency of transmitter
150 kHz to 80 MHz
d = 1,2
80 MHz to 800
MHz
d = 1,2
800 MHz to 2.5
GHz
D = 2,3
0,01 0,12 0,12 0,23
0,1 0,38 0,38 0,73
1 1,2 1,2 2,3
10 3,8 3,8 7,3
100 12 12 23
For transmitters rated at a maximum output power not listed above, the recommended
separation distance d in metres (m) can be estimated using the equation applicable to
the frequency of the transmitter, where P is the maximum output power rating of the
transmitter in watts (W) according to the transmitter manufacturer.
NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency
range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation
is affected by absorption and refl ection from structures, objects and people.
To Next Page
Loading...
