NVIDIA DGX B200 User Guide
10.9. Electrostatic Discharge
Ϫ Caution
ESD can damage drives, boards, and other parts. We recommend that you perform all procedures
at an ESD workstation. If one is not available, provide some ESD protection by wearing an antistatic
wrist strap attached to chassis ground (any unpainted metal surface) on your server when handling
parts.
Always handle boards carefully. They can be extremely sensitive to ESD. Hold boards only by their
edges. After removing a board from its protective wrapper or from the server, place the board com-
ponent side up on a grounded, static free surface. Use a conductive foam pad if available but not the
board wrapper. Do not slide board over any surface.
10.10. Other Hazards
10.10.1. CALIFORNIA DEPARTMENT OF TOXIC
SUBSTANCES CONTROL
Perchlorate Material - Lithium Coin/Button Cell battery. Please dispose of properly.
Special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate.
10.10.2. NICKEL
NVIDIA Bezel. The bezel’s decorative metal foam contains some nickel. The metal foam is not intended
for direct and prolonged skin contact. Please use the handles to remove, attach or carry the bezel.
While nickel exposure is unlikely to be a problem, you should be aware of the possibility in case you are
susceptible to nickel-related reactions.
10.9. Electrostatic Discharge 95
To Next Page
Loading...
