Nvidia DGX B200 - BMC Port Leds; Supported Network Cables and Adaptors; DGX B200 System Topology

NVIDIA DGX B200 User Guide
1.2.4. BMC Port LEDs
The BCM RJ-45 port has two LEDs.
The LED on the left indicates the speed. Solid green indicates the speed is 100M. Solid amber indicates
the speed is 1G.
The LED on the right is green and ashes to indicate activity.
1.2.5. Supported Network Cables and Adaptors
The DGX B200 system is not shipped with network cables or adaptors. You will need to purchase
supported cables or adaptors for your network.
The ConnectX-7 rmware determines which cables and adaptors are supported. For a list of cables
and adaptors compatible with the NVIDIA ConnectX cards installed in the DGX B200 system,
1. Visit the NVIDIA Adapter Firmware Release page.
2. Click the ConnectX model and select the corresponding rmware included in the DGX B200 sys-
tem.
3. From the left Topics pane, select the Validated and Supported Cables and Switches topic.
To congure the BlueField-3 DPU in NIC mode, follow the instructions in NIC Mode for BlueField-3.
1.3. DGX B200 System Topology
The following gure shows the DGX B200 system topology.
14 Chapter 1. Introduction to NVIDIA DGX B200 Systems