Chapter 3. First Boot Setup
This section provides information about the setup process after you rst boot the NVIDIA DGX™ B200
system.
While NVIDIA partner network personnel or NVIDIA eld service engineers will install the DGX B200
system at the site and perform the rst boot setup, the rst boot setup instructions are provided here
for reference and to support any reimaging of the server.
3.1. System Setup
These instructions describe the setup process that occurs the rst time the DGX B200 system is
powered on after delivery or after the server is re-imaged.
Be prepared to accept all End User License Agreements (EULAs) and to set up your username and pass-
word. To preview the EULA, visit the Enterprise Software Agreements page and click NVIDIA Software
License Agreement under NVIDIA AI, DGX and NVIDIA AI Enterprise.
1. Connect to the DGX B200 console as explained in Connecting to the Console.
2. Power on the DGX B200 system in one of the following ways:
▶ Using the physical power button.
21
To Next Page
Loading...
