Nvidia DGX B200 - Open Ports; Configuring a Static IP Address for the BMC

NVIDIA DGX B200 User Guide
6.3. Open Ports
Ensure that the ports listed in the following table are open and available on your rewall to the DGX
B200 system.
Table 2: Open Ports
Port Protocol Function
443 HTTPS Web User Interface
80 HTTPS Redsh service root
443 Redsh Redsh https with auth
623 RMCP+ IPMI
7582 KVM Secure (SSL) KVM redirection
1900 UPNP UPNP discovery
50000 UPNP UPNP discovery
427 SLPD Service Locator
123 NTP Network Time Protocol
161 SNMP SNMP incoming UDP requests
199 SNMP SNMP incoming SMUX PDUs
546 DHCPv6 DHCPv6 messages
5124 CD Media redirection CD media redirection secure (SSL) connections
6.4. Conguring a Static IP Address for the BMC
This section explains how to set a static IP address for the BMC. If your network does not support
DHCP, you need to do this.
Use one of the methods described in the following sections:
▶ Conguring a BMC Static IP Address Using ipmitool
▶ Conguring a BMC Static IP Address by Using the System BIOS
6.3. Open Ports 43