NVIDIA DGX B200 User Guide
Here are some occasions where it might be necessary to recongure settings in the SBIOS:
▶ Conguring a BMC Static IP Address Using the System BIOS
▶ Enabling the TPM and Preventing the BIOS from Sending Block SID Requests
▶ Clearing the TPM
5.2. Conguring the Boot Order
The following instructions describe how to set the boot order at boot time. You can also set the boot
order from the SBIOS setup > Boot screen.
1. Access the DGX B200 console from a locally connected keyboard and mouse or through the BMC
remote console.
2. Reboot the DGX B200 system.
3. Press the F11 key on the NVIDIA splash screen.
34 Chapter 5. SBIOS Settings
To Next Page
Loading...
