Nvidia DGX B200 - Page 25

NVIDIA DGX B200 User Guide
Before the First Boot Setup
Ϫ Caution
Perform the rst boot setup to change the default credentials before you connect the BMC to an
unsecured network.
▶ The default credentials are:
▶ Username: admin
▶ Password: admin
Ϫ Caution
When you create a BMC admin user, we strongly recommend changing the default password for
this user - DO NOT use the default password.
After the First Boot Setup
During the rst boot procedure, you were prompted to congure an administrator username and pass-
word and a password for the BMC. The BMC username is the same as the administrator username:
▶ Username: <administrator-username>
▶ Password: <bmc-password>
1. Ensure you have connected the BMC port on the DGX B200 system to your LAN.
2. Open a browser within your LAN and go to https:∕∕<bmc-ip-address>∕
Ensure popups are allowed for the BMC address.
3. Log in.
4. From the navigation menu, click Remote Control.
The Remote Control page lets you open a virtual Keyboard/Video/Mouse (KVM) on the DGX B200
system just like you are using a physical monitor and keyboard connected to the front of the
system.
5. Click Launch KVM.
The DGX B200 console appears in your browser.
2.1. Connecting to the Console 19