Getting Started with DGX Station A100
DGX Station A100 DU-10189-001 _v5.0.2|7
RESTRICTION: The power source for DGX Station A100 must be 100V and cannot fall below
90V.
CAUTION: Remember the following information:
‣
Use only the supplied power cable and do not use this power cable with any other
products or for any other purpose. Not all power cables have the same current ratings.
‣
Do not use household extension cables with your product. Household extension cables
do not have overload protection and are not intended for use with computer systems.
5. Connect the display to a suitable AC outlet and power on the display.
6. Move the DGX Station A100 power supply rocker switch to the ON position.
To Next Page
Loading...
Need help?
General
