Nvidia Jetson TX2 NX User Manual

NVIDIA Jetson TX2 NX DG-10141-001_v1.1 | ii
Document History
DG-10141-001_v1.1
Version Date Description of Change
1.0 February 24, 2021 Initial Release
1.1 September 28, 2021 • Removed mention of interfaces for WiFi/BT in Table 2-1
“Jetson TX2 NX Interfaces”
• Updated Usage/Descriptions for PMIC_BBAT,
SHUTDOWN_REQ*, POWER_EN, SYS_RESET* and
MOD_SLEEP* in Table 5-1 “Jetson TX2 NX Power and
System Pin Descriptions”
• Updated SHUTDOWN_REQ* pull-up and MOD_SLEEP*
usage in Figure 5-1 “Jetson TX2 NX Power and Control
Block Diagram”
• Replaced much of the existing text with more detail per
power handshake signals in Section 5.1.1 “Power
Handshake Signals”
• Updated to include timing relationships in Figure 5-3
“Power Up Sequence (No Power Button – Auto-Power-
On)”
• Added sequence in Figure 5-4 “Power-up Sequence
(With Power Button)”
• Updated to include timing relationships in Figure 5-5
“Power Down – Initiated by SHUTDOWN_REQ*
Assertion”
• Updated to move GPIO00 to load switch and USB VBUS
Detect to available GPIO in Figure 6-1 “USB Connection
Example”
• Added box and note reference related to AC Caps on
Tegra RX lines in Figure 6-7 “Example PCIe
Connections”

Nvidia Jetson TX2 NX Specifications

General

Brand	Nvidia
Model	Jetson TX2 NX
Category	Computer Hardware
Language	English