Two Power Inlets - Electric Caution Notications:
Warning
After inserting a power cable and conrming the green System
Status LED light is on, make sure that the Fan Status LED shows
green.
If the Fan Status LED is not green, unplug the power connection and
check that the fan module is inserted properly and that the mating
connector of the fan unit is free of any dirt and/or obstacles. If no
obstacles were found and the problem persists, call your NVIDIA
representative for assistance.
Warning
Risk of electric shock and energy hazard. The two power supply
units are independent. Disconnect all power supplies to ensure a
powered down state inside of the switch platform.
ACHTUNG Gafahr des elektrischen Schocks. Entferrnen des
Netzsteckers elnes Netzteils spannungsfrei. Um alle Einhieten
To Next Page
Loading...
