Nvidia Spectrum-2 SN3420 - FRU Replacements

NVIDIA Spectrum-2 SN3000 1U and 2U Switch Systems Hardware User Manual 114
1. Set up an Ethernet connection between the system and a local network machine
using a standard RJ45 connector.
2. Start a remote secured shell (SSH) using the command: ssh -l <username>
<IP_address>
3. Login as admin (default username is admin , password is admin ).
4. Once you get the CLI prompt, you are ready to use the system.
For additional information about NVIDIA Onyx (MLNX-OS), refer to the NVIDIA Onyx
(MLNX-OS) User Manual located on the NVIDIA Networking Documentation Website.
Conguring Network Attributes Using Cumulus Linux
For Cumulus Linux initial conguration instructions, see Conguring Cumulus Linux in the
Cumulus Linux Quick Start Guide.
Remote Connection with Cumulus Linux
Cumulus Linux uses the OpenSSH package to provide SSH functionality. To securely
access a Cumulus Linux switch remotely, please follow the instructions on the "SSH for
Remote Access" page in the Cumulus Linux User Guide .
FRU Replacements
# ssh -l <username> <ip_address>
Mellanox Onyx (MLNX-OS) Switch Management

Password:
Note