Heavy Equipment
This equipment is heavy and should be moved using a mechanical lift to avoid injuries.
Risk of Electric Shock!
With the fan module removed power pins are accessible within the module cavity.
Do not insert tools or body parts into the fan module cavity.
For AC powered switch systems: Disconnecting one power supply only disconnects
one module. To isolate the unit completely, all connected power supplies must be
disconnected.
In QM97X0/HGX H100 switch systems: for 200-240Vac use only
Over-temperature
This equipment should not be operated in an area with an ambient temperature exceeding
the maximum value listed in the product specications. Moreover, to guarantee proper
ventilation, allow at least 8 cm (3 inches) of clearance around the ventilation openings.
Stacking the Chassis
The chassis should not be stacked on any other equipment. If the chassis falls, it can
cause bodily injury and equipment damage.
Redundant Power Supply Connection (OPTIONAL)—Electrical Hazard
To Next Page
Loading...
