This product includes a redundant power or a blank in its place. In case of a blank power
supply, do not operate the product with the blank cover removed or not securely fastened.
Double Pole/Neutral Fusing
This system has double pole/neutral fusing. Remove all power cords before opening the
cover of this product or touching any internal parts.
Multiple Power Inlets
Risk of electric shock and energy hazard. The PSUs are all independent. Disconnect all
power supplies to ensure a powered down state inside of the switch platform.
During Lightning—Electrical Hazard
During periods of lightning activity, do not work on the equipment or connect or
disconnect cables.
Copper Cable Connecting/Disconnecting
Copper cables are heavy and not exible, as such they should be carefully attached to or
detached from the connectors. Refer to the cable manufacturer for special
warnings/instructions.
Rack Mounting and Servicing
When this product is mounted or serviced in a rack, special precautions must be taken to
ensure that the system remains stable. In general, the rack should be lled with
equipment starting from the bottom to the top.
Equipment Installation
This equipment should be installed, replaced, and/or serviced only by trained and qualied
personnel.
Equipment Disposal
Disposal of this equipment should be in accordance to all national laws and regulations.
Local and National Electrical Codes
To Next Page
Loading...
