NXP Semiconductors
LPCXpresso55S36UM
LPCXpresso55S36 Development Board User Manual
Term Description
SMT Surface-mount technology
SPI Serial peripheral interface
SWD Serial wire debug
SWO Serial wire debug trace output
UART Universal asynchronous receiver/transmitter
USART Universal synchronous/asynchronous receiver/transmitter
USB Universal serial bus
VCOM Virtual communication
Table 1. Acronyms and abbreviations...continued
1.2 Related documentation
The table below lists and explains the additional documents and resources that you can
refer to for more information on the LPCXpresso55S36 board. Some of the documents
listed below may be available only under a non-disclosure agreement (NDA). To request
access to these documents, contact your local field applications engineer (FAE) or sales
representative.
Document Description Link
LPC553x Reference Manual Intended for system software and hardware
developers and application programmers who want
to develop products with LPC553x/LPC55S3x MCU
LPC553xRM.pdf
LPC553x Data Sheet Provides information about electrical
characteristics, hardware design considerations,
and ordering information
LPC553x.pdf
LPC55S6x/LPC55S2x/LPC552x
User manual (UM11126)
Intended for system software and hardware
developers and application programmers who want
to develop products with LPC55S6x/LPC55S2x/
LPC552x MCU
UM11126.pdf
MCU-Link Energy Measurement
Capabilities Application Note
(AN13660)
This document shows the results of the MCU-Link
in different power settings and compares it to a
third-party tool
AN13660.pdf
Table 2. Related documentation
1.3 Board kit contents
The table below lists the items included in the LPCXpresso55S36 board kit.
Item description Quantity
LPCXpresso55S36 board 1
USB cable 1
M3 x 40 mm female-female brass hex standoff 4
M3 x 5 mm stainless steel Phillips pan head screw 4
LPCXpresso55S36 Quick Start Guide 1
Table 3. Board kit contents
1.4 Block diagram
The figure below shows the LPCXpresso55S36 block diagram.
LPCXpresso55S36UM All information provided in this document is subject to legal disclaimers. © NXP B.V. 2022. All rights reserved.
User manual Rev. 2 — 5 September 2022
3 / 46
To Next Page
Loading...
