NXP Semiconductors arm LPCXpresso55S36 - Board Pictures

NXP Semiconductors
LPCXpresso55S36UM
LPCXpresso55S36 Development Board User Manual
1.6 Board pictures
The figure below shows the top-side view of the LPCXpresso55S36 board, with
connectors, push buttons, and LEDs highlighted.
J1 (USB MCU-LINK)
J2 (USB ext. supply)
J3 (USB target MCU)
J19 (CAN)
J5 (Audio in)
J6 (Audio out)
JP3 (UART)
J44 (Audio expansion)
J102
J132
J92
J122
J8 (mikroBUS)
J7 (mikroBUS)
J41 (Ext. DMIC)
J38 (SWD)
SW1 (Wake-up)
SW3 (User)
SW2 (Reset)
D4
D5
D16 D18 D17
D15
D20
D14
(Motor 2 + Arduino)
(Motor 2 + Arduino)
Figure 2. LPCXpresso55S36 connectors, push buttons, and LEDs (top-side view)
The figure below shows the bottom-side view of the LPCXpresso55S36 board, with four
connectors and one LED highlighted.
LPCXpresso55S36UM All information provided in this document is subject to legal disclaimers. © NXP B.V. 2022. All rights reserved.
User manual Rev. 2 — 5 September 2022
6 / 46