NXP Semiconductors arm LPCXpresso55S36 - Connectors

NXP Semiconductors
LPCXpresso55S36UM
LPCXpresso55S36 Development Board User Manual
JP76
JP1
JP20
JP2
JP51 JP53
JP19
JP33 JP74 JP21, JP28, JP22
JP49 JP48
JP26 JP4
JP71
JP70
JP12
JP50 JP52
JP45 JP56
JP64 JP43 JP41 JP65
JP44 JP62 JP42 JP61
JP66
JP67
JP68 JP69
JP63 JP46
JP23 JP24
JP25 JP75
JP27
JP80
JP73
JP77
JP79
JP58
JP78 JP72
J43
JP18
JP7
JP8
Figure 4. LPCXpresso55S36 jumpers
1.7 Connectors
The LPCXpresso55S36 connectors are shown in Figure 2 and are described in the table
below.
Part identifier Connector type Description Reference section
J1
USB 2.0 micro-B receptacle
MCU-Link debug probe USB
connector
J2
USB 2.0 micro-B receptacle
External 5 V power connector
J3
USB 2.0 micro-AB receptacle
Target MCU USB connector
Section 2.3
JP3 1x3 pin header Connector for accessing the
Flexcomm 0 (USART) port of the
target MCU for an external UART
connection
Section 2.4
J5 Audio input connector for onboard
audio codec
J6
4-pin audio jack
Audio output connector for onboard
audio codec
J44 2x12 pin header Audio expansion connector
Section 2.6
J19 DB9 male connector High-speed CAN connector Section 2.8
J45 (DNP) 2x14 pin header External flash connector Section 2.10
Table 5. LPCXpresso55S36 connectors
LPCXpresso55S36UM All information provided in this document is subject to legal disclaimers. © NXP B.V. 2022. All rights reserved.
User manual Rev. 2 — 5 September 2022
8 / 46