NXP Semiconductors Layerscape LS1028A BSP - Page 101

8021q: adding VLAN 0 to HW filter on device swp0
br0: port 2(swp1) entered blocking state
br0: port 2(swp1) entered disabled state
device swp1 entered promiscuous mode
mscc_felix 0000:00:00.5 swp1: Unsupported PHY speed: 0
Vitesse VSC8514 1f8100000:11: attached PHY driver [Vitesse VSC8514] (mii_bus:phy_addr=1f8100000:11,
irq=POLL)
br0: port 2(swp1) entered blocking state
br0: port 2(swp1) entered forwarding state
8021q: adding VLAN 0 to HW filter on device swp1
br0: port 3(swp2) entered blocking state
br0: port 3(swp2) entered disabled state
device swp2 entered promiscuous mode
mscc_felix 0000:00:00.5 swp2: Unsupported PHY speed: 0
Vitesse VSC8514 1f8100000:12: attached PHY driver [Vitesse VSC8514] (mii_bus:phy_addr=1f8100000:12,
irq=POLL)
br0: port 3(swp2) entered blocking state
br0: port 3(swp2) entered forwarding state
8021q: adding VLAN 0 to HW filter on device swp2
br0: port 4(swp3) entered blocking state
br0: port 4(swp3) entered disabled state
device swp3 entered promiscuous mode
mscc_felix 0000:00:00.5 swp3: Unsupported PHY speed: 0
Vitesse VSC8514 1f8100000:13: attached PHY driver [Vitesse VSC8514] (mii_bus:phy_addr=1f8100000:13,
irq=POLL)
br0: port 4(swp3) entered blocking state
br0: port 4(swp3) entered forwarding state
8021q: adding VLAN 0 to HW filter on device swp3
br0: port 5(swp4) entered blocking state
br0: port 5(swp4) entered disabled state
device swp4 entered promiscuous mode
mscc_felix 0000:00:00.5 swp4: Link is Up - 1Gbps/Full - flow control off
Generic PHY fixed-0:02: attached PHY driver [Generic PHY] (mii_bus:phy_addr=fixed-0:02, irq=POLL)
br0: port 5(swp4) entered blocking state
br0: port 5(swp4) entered forwarding state
8021q: adding VLAN 0 to HW filter on device swp4
br0: port 6(swp5) entered blocking state
br0: port 6(swp5) entered disabled state
device swp5 entered promiscuous mode
mscc_felix 0000:00:00.5 swp5: Link is Up - 1Gbps/Full - flow control off
Generic PHY fixed-0:03: attached PHY driver [Generic PHY] (mii_bus:phy_addr=fixed-0:03, irq=POLL)
br0: port 6(swp5) entered blocking state
br0: port 6(swp5) entered forwarding state
8021q: adding VLAN 0 to HW filter on device swp5
Generic PHY fixed-0:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=fixed-0:00, irq=POLL)
8021q: adding VLAN 0 to HW filter on device eno2
mscc_felix 0000:00:00.5 swp0: Link is Down
Generic PHY fixed-0:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=fixed-0:01, irq=POLL)
8021q: adding VLAN 0 to HW filter on device eno3
mscc_felix 0000:00:00.5 swp1: Link is Down
mscc_felix 0000:00:00.5 swp2: Link is Down
mscc_felix 0000:00:00.5 swp3: Link is Down
mscc_felix 0000:00:00.5 swp4: Link is Up - 1Gbps/Full - flow control off
br0: port 1(swp0) entered disabled state
br0: port 2(swp1) entered disabled state
br0: port 3(swp2) entered disabled state
br0: port 4(swp3) entered disabled state
mscc_felix 0000:00:00.5 swp5: Link is Up - 1Gbps/Full - flow control off
fsl_enetc 0000:00:00.2 eno2: Link is Up - 1Gbps/Full - flow control off
fsl_enetc 0000:00:00.6 eno3: Link is Up - 1Gbps/Full - flow control off
Device Drivers
Layerscape LS1028A BSP User Guide, Rev. 0.3, 04/2019
NXP Semiconductors
101