• SATA drive, spinning, or SSD (for boards with a SATA port)
• eMMC flash (when available on board)
LS1028A BSP provides scripts that populate a mass storage device with the needed files. These scripts can run on a Linux PC.
It is especially simple to use an SD card or USB flash drive because they are the easiest to move between a Linux PC and the
NXP board.
1.1 Reference documentation
The table below lists and explains the additional documents and resources that you can refer to for more information on the
LS1028A SoC and LS1028A board (RDB and QDS).
Some of the documents listed below may be available only under a non-disclosure agreement (NDA). To request access to these
documents, contact your local field applications engineer or sales representative.
Table 1. Reference documentation
Document Description Link/How to access
QorIQ LS1028A Reference Manual Provides a detailed description about the
LS1028A QorIQ multicore processor and
its features, such as memory map, serial
interfaces, power supply, chip features,
and clock information.
Contact FAE / sales representative
QorIQ LS1028A Reference Design Board
Getting Started Guide
Explains the LS1028ARDB settings and
physical connections needed to boot the
board.
QorIQ LS1028A Reference Design Board
Getting Started Guide
QorIQ LS1028A Reference Design Board
Reference Manual
Provides detailed information about
LS1028ARDB interfaces, power supplies,
clocks, DIP switches, LEDs, and CPLD
system controller.
QorIQ LS1028A Reference Design Board
Reference Manual
QorIQ LS1028A Development System
Getting Started Guide
Explains the LS1028AQDS settings and
physical connections needed to boot the
board.
Contact FAE / sales representative
QorIQ LS1028A Development Sytem
Reference Manual
Provides detailed information about
LS1028AQDS interfaces, power supplies,
clocks, DIP switches, LEDs, and CPLD
system controller.
Contact FAE / sales representative
Reference documentation
Layerscape LS1028A BSP User Guide, Rev. 0.3, 04/2019
NXP Semiconductors
5
To Next Page
Loading...
