NXP Semiconductors Layerscape LS1028A BSP - Page 11

Table 3. Fixed issues (continued)
QLINUX-10857
LS1028ARDB GPU: few demos such as OpenGLES (for
example, tutorial4_es20) and OpenVG (for example, tiger)
hang
Fixed
QLINUX-11094 LS1028A: There is IOMMU call trace when running
802.1AS with linuxptp
Fixed
QUBOOT-4813 LS1028AQDS - DSPI does not work under U-Boot Fixed
QLINUX-11091 LS1028ARDB: Linux IPv4 Forward Performance with
switch port is much lower than PRL
Fixed
QLINUX-11152 LS1028ARDB: Kernel does not reboot after kill watchdog
process
Fixed
QLINUX-11391 LS1028ARDB: System hangs when add switch port to
bridge when connect switch port to TFTP server
Fixed
QUBOOT-4990 LS1028ARDB: SATA does not work Fixed
Table 4. Open/Known issues
ID Description
QLINUX-11337 LS1028A: Time gate accuracy does not reach PRL
QLINUX-11394 LS1028ARDB: video playback using GStreamer hang quickly on weston
QLINUX-11423 LS1028AQDS: Kernel booting failed using LPUART U-Boot
PPA is replaced by ‘TF-A’, that is, Trusted Firmware for ARM in this release.
NOTE
Open, Fixed and Known Issues
Layerscape LS1028A BSP User Guide, Rev. 0.3, 04/2019
NXP Semiconductors
11