NXP Semiconductors Layerscape LS1028A BSP - Page 7

• Time Sensitive Network (TSN) support:
— TSN configuration tool (tsntool)
— ENETC 1588 two steps timestamping support
— ENETC TSN driver: Qbv, Qbu, Qci, Qav
— SWITCH TSN driver: Qbv, Qci, Qbu, Qav, 802.1CB support
•
U-Boot: 2018.09
— U-Boot image includes the device tree
— Non-secure
— Boot from FlexSPI NOR flash, SD
— A72 core, Timer, UART
— Clock, FPGA/CPLD, UART, DDR4
— eSDHC, eMMC, GIC, I2C, OCRAM
— PCIe-gen1-rootcomplex, USB, SATA
— FlexSPI access to NOR flash
— Networking support using ENETC
— MDIO PHY support
— eDP/DP firmware loading
Linux: 4.14.47
— A72 core, Timer
— SMP-boot
— Clock, UART, DDR4
— DSPI [QDS board only]
— eSDHC, eMMC, GIC, I2C, OCRAM
— USB, SATA
— FlexSPI access to NOR flash
— PCIe-gen3-rootcomplex, USB, SATA
— Networking interfaces: ENETC, L2Switch
— ENETC PCIe PF and VF full featured Linux ethernet drivers and TSN driver
— L2Switch features: Switchdev support and TSN driver
— SEC, QDMA
— System Memory Management Unit (SMMU)
— MDIO PHY support
— Mutimedia IPs - GPU, LCD, eDP/DP
— Integrated Interchip Sound (I2S) / Synchronous Audio Interface (SAI)
— eDMA, CAN
Userspace components
— TSNtool for configuring ENETC-TSN and L2Switch
— OpenCL and OpenGL testcases and applications
Summary of overall features
Layerscape LS1028A BSP User Guide, Rev. 0.3, 04/2019
NXP Semiconductors
7