EasyManua.ls Logo

NXP Semiconductors UM11483 - 88 W8987-based Azure Wave AW-CM358 MA Module

NXP Semiconductors UM11483
39 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
NXP Semiconductors
UM11483
Getting Started with NXP Wireless Modules for i.MX 8M-Quad Platforms
UM11483 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2020. All rights reserved.
User manual Rev. 1 — 28 September 2020
16 / 39
4.1.1.5 Azurewave AW-CM358MA module
Figure 9. AzureWave AW-CM358MA module
4.1.1.6 i.MX 8M Quad rework for SDIO support on M.2
This section provides the instruction to enable the SDIO support on M.2 connector.
Rework the following registers on the i.MX 8M Quad EVK.
Silkscreen of PCBA SCH-38820 / PCBA SCH-29615
Remove 0Ω 0402 resistors: R1603, R1617, R1618, R1619,R1620 and R1621 (micro
SD card J1601)

Table of Contents

Other manuals for NXP Semiconductors UM11483

Related product manuals