NXP Semiconductors UM11483 - i.MX 8 M Quad switch settings

NXP Semiconductors
UM11483
Getting Started with NXP Wireless Modules for i.MX 8M-Quad Platforms
UM11483 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2020. All rights reserved.
User manual Rev. 1 — 28 September 2020
8 / 39
3 i.MX 8M Quad EVK platform
3.1 Overview
This section briefly describes the i.MX 8M Quad Evaluation Kit based on i.MX 8M Quad,
as an introduction to i.MX 8M Quad applications processor. The EVK includes the
hardware design files, tools and board support packages (BSPs) for Linux
®
.
For more detail about the i.MX 8M Quad EVK, please refer to i.MX 8M Evaluation Kit on
NXP website.
3.2 i.MX 8M Quad evaluation board
The i.MX 8M Quad evaluation board is based on the NXP i.MX 8M Quad applications
processor. The i.MX 8M Quad processor features an advanced implementation of the
Quad Arm Cortex
®
-A53+ Arm Cortex-M4 core which operates at speeds up to 1.5 GHz.
The i.MX 8M Quad features an integrated power management module that reduces
the complexity of external power supply and simplifies the power sequencing. Each
processor provides a 32-bit LVDDR3L/DDR4/LPDDR4 memory interface and other
interfaces to connect peripherals such as HDMI, LCD, Wi-Fi, Bluetooth
™
, GPS and
camera sensors.
Figure 4. i.MX 8M Quad EVK block diagram