NXP Semiconductors UM11483 - NXP-based Wireless Modules

NXP Semiconductors
UM11483
Getting Started with NXP Wireless Modules for i.MX 8M-Quad Platforms
UM11483 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2020. All rights reserved.
User manual Rev. 1 — 28 September 2020
9 / 39
For more detailed information about the processor, please refer to the data sheet and
reference manual on www.nxp.com.
Table 3 lists the features of i.MX 8M Quad EVK.
Table 3. Features of i.MX 8M Quad
Features Features (continued)
i.MX 8M Quad applications processor with five cores (4×Arm
®
Cortex
®
-A53 and 1× Cortex-M4)
M.2 connector for Wi-Fi/Bluetooth (PCIe, USB, UART, I2C
and I2S)
3 GB, 32-bit LPDDR4 with 1.6 GHz clock USB3.0 Type-A connector
eMMC 5.0, 16 GB HDMI2.0a Type-A connector
32 MB Octal SPI NOR flash 1 Gbit/s Ethernet
Micro SD card connector Mini-SAS MIPI-DSI connector
USB3.0 Type-C connector with PD support 2x mini-SAS MIPI-CSI connectors for Camera
USB to serial converter for debug
Infrared receiver LEDs for power indication and general-
purpose use
3.5 mm audio jack for amplified speakers JTAG 10-pin connector