Instruction Manual CyberScan pH 11 / 110
66
15.2 Oakton Instruments
Item
Oakton Instruments
Order Code
CyberScan pH 11 Portable pH/mV Meter with 2 electrode holders
15X000700, temperature probe EC-PH5-TEM01P
35614-22
CyberScan pH 11 Portable pH/mV Meter with pH electrode EC-FC72522-
01B, 2 electrode holders 15X000700, temperature probe EC-PH5-TEM01P &
pH carrying kit set EC-PHWP-KIT
35614-20
CyberScan pH 110 Portable pH/mV/RS232 Meter with 2 electrode holders
15X000700, PC-based DAS, RS232C cable & temperature probe EC-PH5-
TEM01P
35615-22
CyberScan pH 110 Portable pH/mV/RS232 Meter with pH electrode EC-
FC72522-01B, 2 electrode holders 15X000700, temperature probe EC-PH5-
TEM01P, PC-based DAS, RS232C cable & pH carrying kit set EC-PHWP-
KIT
35615-20
Temperature probe for pH 11 and pH 110 meters. 35613-05
Electrode Holder for probes and electrodes (12 mm diameter) 35615-06
General purpose epoxy-body pH combination electrode, single-junction,
12x110 mm, 1-m cable length.
59001-65
General purpose epoxy-body pH combination electrode, double-junction,
12x110 mm, 1-m cable length.
35641-51
“All-in-1” pH/Temperature (ATC) combination epoxy-body electrode, single-
junction, 12x110 mm, 1-m cable length.
35811-71
“All-in-1” pH/Temperature (ATC) combination epoxy-body electrode, double-
junction, 12x110 mm, 1-m cable length.
35811-72
Combination ORP electrode, epoxy-body, single-junction, 12x110 mm, 1-m
cable length
35649-50
Combination ORP electrode, epoxy-body, double-junction, 12x110 mm, 1-m
cable length
35649-51
RS232 Communication Cable: 9-pin male to 9-pin female connector, 1m
cable length.
35615-09
Serial Impact Micro-Printer: Dot-matrix, paper-roll portable printer with 25-pin
female connector, with a roll of paper and 110/120 VAC power adapter
provided
35622-00
Serial Impact Micro-Printer: Dot-matrix, paper-roll portable printer with 25-pin
female connector, with a roll of paper and 220/230 VAC power adapter
provided
35622-05
Soft belt-loop carrying case 35615-75
pH kit for pH 11 & pH 110 meter – Hard plastic carrying case comprises of 1
pc deionised water bottle (480 ml, empty), 1 x pH 4.01, pH 7.00 & pH 10.01
buffer pouches (20-ml), 4 pcs calibration jars (30-ml, empty), & 1 pc
rinse/waste water bottle (480-ml, empty).
35614-79 (35632-98 +
five of each buffer
pouch included)
110/120 VAC Power Adapter (50/60 Hz) 2-flat pin US type, 9 VDC 500mA
(for standard portable meters)
35615-07
220/230 VAC Power Adapter (50/60 Hz) 2-round pin Euro type, 9 VDC
500mA (for standard portable meters)
35615-08
To Next Page
Loading...
