Need help?Do you have a question about the Oakton pH 110 and is the answer not in the manual?
General| pH Resolution | 0.01 pH |
|---|---|
| pH Accuracy | ±0.01 pH |
| Display | LCD |
| Temperature Range | 0 to 100°C (32 to 212°F) |
| Temperature Accuracy | ±0.5 °C (±0.9 °F) |
| Temperature Resolution | 0.1 °C/°F |
| Temperature Compensation | Automatic (0 to 100°C) |
| Buffer Recognition | USA, NIST |
| Power Supply | 4 x AAA batteries |
Explains the LCD screen's primary and secondary display functions and indicators.
Details the functions of each button on the meter's keypad.
Guides on connecting pH/ORP/ISE electrodes and temperature probes.
Pinout configuration for the RS232C connector and cable setup.
Key information and recommendations before performing meter calibration.
Steps to prepare the meter and electrode for accurate calibration.
Details on buffer options for pH 11 and pH 110 meter calibration.
Step-by-step guide for performing pH calibration using Automatic Temperature Compensation.
Procedure for performing mV calibration (offset) on the pH 110 meter.
Steps for calibrating the temperature probe or sensor for accurate readings.
How ATC works and how to enable it by connecting the temperature probe.
General instructions on how to take pH and mV measurements.
Troubleshooting common issues encountered with the software.
Explains common error messages and their corrective actions.
General troubleshooting guide for common meter problems.
To Next Page
