27
The Installation of Onyx CADPro or Onyx GraphicsPro
[40]
Installation: Registration
1. After a short while the Registration window is activated.
Click on the "Request Registration Code" button. The registration is automatically
done.
[41]
2. In case the automatic registration was not possible, do the manual registration.
Write down the serial number (6 x 4 characters) and click on "OK".
[42]
3. Browse to http://www.onyxgfx.com/register.
4. Fill in the form and click on "Register".
To Next Page
Loading...
Need help?
General
