Oce CS4236 - Sleep and Wake Modes

Sleep and wake modes
Introduction
With the mains power switch ON, scanner power can be set in Sleep mode and Wake
mode.
■
Sleep mode is the energy saving mode.
The scanner cannot scan when in the Sleep mode.
■
Wake mode is the full power ON mode for scanner operation.
From Wake mode into Sleep mode:
#
RemarksAction
The scanner will go from Wake
mode into Sleep mode:
■
Automatically: after a set idle
time (see Sleep mode options
below).
■
Manually: when you hold the
power button down for 3
seconds.
1
Scanner in Sleep mode – Power
LED is orange
2
From Sleep mode into Wake mode
#
RemarksActionStep
The scanner will go into Wake
mode from Sleep mode:
■
When you feed a document
into the scanner.
■
When you press the power
button.
1
Chapter 4 - Switch the scanner ON and OFF24
Sleep and wake modes