6: Technical Specifications
225-00000-000-11-201604 47
CE, FCC, CISPR 11:2010, EMC 2004/108/EC and EN 61326-1:2013
1
Dynamic range for a single acquisition is a measure of the ratio of full signal to noise.
2
Dynamic range of the system is the range of the detectable light level and can be thought of as the
maximum detectable light level at the minimum integration time divided by the minimum detectable
light level at the maximum integration time.
3
Scan rate is dependent on the operating computer and not the spectrometer. These figures assume a
non real-time operating system.
4
Contact info@oceanoptics.com to obtain copies of certifications
To Next Page
Loading...
