About This Manual
Document Purpose and Intended Audience
This document provides you with instructions to get your system up and running. In addition to the NIR
Spectrometer installation and operation instructions, this manual also includes information for locating
the OOIBase32 installation instructions (see
Product-Related Documentation below).
What’s New in this Document
This version of the NIR Near Infrared Fiber Optics Spectrometers Installation and Operation Manual
removes references to the Spectrometer Configuration Diskette.
Document Summary
Chapter Description
Chapter 1: Introduction
Introduces the product features. Also contains a list
of items included in the shipment.
Chapter 2: Installing the NIR Spectrometer
Contains information for installing and configuring
your NIR Spectrometer. These instructions include
information on using your NIR Spectrometer with
the OOIBase32 software.
Chapter 3: Troubleshooting
Contains typical problems and suggested
resolutions.
Chapter 4: Sample Experiments
Provides procedures for conducting sample
experiments with your NIR Spectrometer
(absorbance, reflection, transmission, relative
irradiance, and time acquisition).
Appendix A: Calibrating the Wavelength of
the NIR Spectrometer
Contains instructions for calibrating your NIR
Spectrometer.
Appendix B: Specifications
Contains technical specifications for the NIR
Spectrometer and the NIR Detector.
Appendix C: NIR256-2.5µm Sensitivity
Provides some additional sensitivity specifications
for the NIR256-2.5 Spectrometer.
197-00000-512-02-0305 iii
To Next Page
Loading...
Need help?
General
