4: Sample Experiments
Note
If at any time any sampling variable changes (including integration time, averaging,
boxcar smoothing, etc.) you must store a new reference and dark spectrum.
Time Acquisition Experiments
OOIBase32 allows you to perform time acquisition experiments. Time acquisition experiments track
processes, perform kinetic analyses, and monitor spectral events all as a function of time. You can collect,
as a function of time, spectral data from up to six single wavelengths (designated as Channels A through
F) and up to two mathematical combinations of these wavelengths (designated as Combinations 1 and 2).
Additionally, you can acquire data in any mode (transmission, absorbance, etc.).
For more details about this and other OOIBase32 functions, refer to the
OOIBase32 Spectrometer
Operating Software Online Help System.
►
Procedure
Follow the steps below to perform a time series experiment in OOIBase32:
1. Enter scope mode and store a reference spectra and dark spectra.
2. Choose the measurement mode (absorbance, transmission, etc.) and select Time Acquisition |
Configure | Configure Time Channels from the menu bar to access the Time Acquisition
Channel Configuration screen.
Proceed to the
Configuring the Time Acquisition Configuration Screen section below.
197-00000-512-02-0305 27
To Next Page
Loading...
