Oceanic versa - Dive Mode Bar Graphs; CONTROL OF DISPLAYS

18
SUMMARY OF SET MODES
To access Set Mode from the Surface Sequence, press the Button for 2 seconds.
To set Units of Measure - press and release the button to toggle between FEET/METERS.
• To save the setting - press the button for 2 seconds.
To set Hour Format - press and release the button to toggle between ON/OFF.
• To save the setting - press the button for 2 seconds.
To set Hour - press and release the button until the correct value appears.
• To save the setting - press the button for 2 seconds.
To set Minutes - press and release the button until the correct value appears.
• To save the setting - press the button for 2 seconds.
To set Water Activation - press and release the button to toggle between ON/OFF.
• To save the setting and return to Surface Sequence - press the button for 4 seconds.