28
Fig. 29 -Gauge Mode
(after surfacing)
• Alternate displays are not available while in Gauge
Mode.
The Versa will also enter an Immediate Violation Mode
5 minutes after reaching the surface from a dive in which a
Delayed Violation occurred.
On the surface, Gauge Mode displays the Dive Number,
Surface Interval, and the full Tissue Loading Bar Graph flash-
ing (Fig. 29). It does not provide the Pre Dive Planning Se-
quence or the Time to Fly feature.
The countdown timer that appears with a single dash dur-
ing the Surface Sequence is only provided to inform you of
the time remaining before normal Versa operation can re-
sume with full features and functions.
This condition is considered a Permanent Viola-
tion, and in the event that a dive is made during
the 24 hour period, a full 24 hour surface interval
must then be served before all functions are re-
stored.
Be a RESPONSIBLE DIVER at all times.
To Next Page
Loading...
