OEG KSW-E - Page 170

FRE
170 Caractéristiques techniques
CARACTERISTIQUES TECHNIQUES
Caractéristiques générales
Tension d‘alimentation ··············································· 230 V ~ , 50 Hz,
Consommation ··························································· 5 VA
Sortie relais ································································ 4 (1) A ~, 250 V ~
Sortie Triac ································································· 1 (1) A ~, 250 V ~
Protection ··································································· IP20 selon EN 60529
Classe de protetcion ··················································· II selon EN 60730-1
Boîtier régulation ························································ ASA - Thermoplastique
Dimensions (l x H x P): ··············································· 113 x 163 x 48 mm
Poids: ········································································ 391 g
Température ambiante ··············································· 5 °C à +40 °C
Température ambiante stockage ································ -20 °C à +65 °C
Caractéristiques techniques
Type sonde température ············································ Pt1000 ou KTY
Section minimale du conducteur sonde ······················ 0.3 mm
2
Section conducteur réseau ········································· 0.75 ÷ 1.5 mm
2
Longueurs des conducteurs réseau ··························· max. 50 m