Ohmeda Biox 3700 - Page 11

^^
1118-301
CAUTIONS
A CAPTION INDICATES A CONDITION THAT MAY LEAD TO
EQUIPMENT DAMAGE OR MALFUNCTION.
Federal law in the U.S.A. and Canada restricts this device to
Page 6) °r °n thS °rder °f llcensed medical Petitioner. (See
Use only the probes supplied for this model of oximeter. Check
the Identification Number/Serial Number Tag (A) which is located
SSn fl?95annv ^n^T"0^ ^ model nuraber mus* read:
MOD 8122-OOX or 8121-OOX (X represents a digit from 1 through
5). (See Pages 15, 17, 22, 36) 8
Do NOT apply tension to the probe cable.
40, 44, 46, 49, 51, 53)
(See Pages 18, 36, 38,
Check rear panel voltage setting before connecting the oximeter
to AC mains power (USA 120 VAC). (See Page 25)
Avoid storing the oximeter and probes at temperatures exceeding
-20 degrees C (-4 degrees F) to 60 degrees C (140 degrees F).
- 4 -
01/27/86