Ohmeda Biox 3700 - Flex Probe Attachment (Adult)

1118-301
PREPARING THE PATIENT
ATTACHMENT OF THE FLEX PROBE
ADULTS:
SELECTING A TEST SITE:
The suggested test site is a finger. Proper coverage of the photo
detector is essential. Use the finger which best covers the photo
detector. .
1. Clean the surface of the probe before and after each patient use.
(See Page 84)
2. Remove the center strip of paper from the Disposable Adhesive Wrap,
3.
Gently flatten the probe if necessary. Place the probe on the center
ot the wrap with the emitter towards the tab.
emitter
detector
tab
- 41 -
01/27/86
^