Ohmeda Biox 3700 - General Operation Guidelines (Quick Start Up)

JP*\
1.
2.
3.
4.
1118-301
WARNING
GENERAL OPERATION GUIDELINES
(Quick Start Up)
EXPLOSION HAZARD: Do NOT use in the presence of
flammable anesthetics.
Plug oximeter into AC mains power (USA 120 VAC) or use battery
power.
CAUTION
Use ONLY the probes supplied for this model
of oximeter. Check the Identification Number/
Serial Number Tag (A) which is located on the
cable near the connector. The model number must
read: MOD 8122-OOX or MOD 8121-OOX (X represents
a digit from 1 through 5).
Determine which probe to use and plug it into the probe
connector. (See Pages 35-36)
Prepare the patient. (See Pages 37-49)
Attach the probe to the patient. (See Pages 37-49)
- 17 -
01/27/86