Ohmeda Biox 3700 - Page 28

B.
C.
1118-301
DIGITAL DISPLAY - This displays the SaO, and Pulse Ral-„ „
and the Sa02 and Pulse Rate readings. The disolav %«h 'J"™1*"1"
power up directly after the "SYSrS'ipE&i^StJ^H a^d"'
haf blen^^d" "The"1* CrdltI°nS WherS n°raal d"" '"lectio
nas Deeri interrupted. The dashes remain on the display until data
to^necldl,?802 8nd PUlSe «"• ~"- « -« (^PProxiJte^y 5
1.
2.
3.
4.
5
6.
DIGITAL DISPLAY
Sa02 Numeric Display -- calculated Sa02
mVf»l ^f™ ^f5 ~ thre8hold f°r low Sa02 alarm
High Sa02 Alarm Limit -- threshold for high Sa02 alarm
Pulse Rate Numeric Display - calculated pulse rate
ii^lL^! Ai!r" ^ - threshold ^r low pulse rate alarm
High Pulse Rate Alarm Limit -- threshold for high pulse rate
alarm
nTu^!^!?"^0! 7 "" Pr°bes 8uPPlled with thl. model oximeter
plug into this nine hole connector. er
CAUTION
Use ONLY the probes supplied for this model
of oximeter. Check the Identification Number/
Serial Number Tag (A) which is located on the
cable near the connector. The model number must
read: MOD 8122-OOX or MOD 8121-OOX (X represents
a digit from 1 through 5).
- 22 -
01/27/86
/^lk
^%