Oki 182 - Page 117

--------_APPENDIX B SOFTWARE NOTES
Because ribbon selection happens to be a toggle, the same
keys turn the feature on and
off (example: "!\PY underline
!\PY stopped" would give you this: "underline stopped"),
you must enter the code to turn off the command.
Type ~, then enter the following code sequence to turn off
the continuous underlining:
1 B <CR>
2D <CR>
00 <CR>
<CR>
MENU ITEM 0: USER DEFINED FUNCTIONS
This selection lets you set WordStar commands to make
any four feature changes. Keep in
mind that for each fea-
ture you
want to use, you'll need to add a command to
turn it off.
We're going to use one command for Con-
densed
print (17.1 cpi), one for Double-width printing, one
to stop both
of these features (i.e., return to 10 cpi print-
ing), and one to stop superscripts or subscripts.
(See Chart
on
pages 77 to 80.)
Type ~. Then enter the code sequence to start condensed
printing:
OF <CR>
. <CR>
Type ~. Then enter the code for double-width printing:
1B <CR>
57 <CR>
01 <CR>
<CR>
101